Products

AD-30 Multi-Hold

This unit was designed for today’s demands and looking to the future. The default setup for the AD-30 is the “Tone Hold” mode; this mode lets the unit work with virtually any Analog phone set on the market. It also works with the "Hold" button on the RCA 2540x, 2541x, 2542x phones.

AD-30 A1 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for AT&T 1040, 1070, and 1080 phones. Once installed on an AD-30, you simply use the hold button on any of these phones and the unit will automatically activate. Regardless of which phone this unit is installed on, all of the 1040, 1070, and 1080 phones will be able to use it.

AD-30 A2 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for AT&T SB67118, 138, and 148 phones. Once installed on an AD-30, you simply use the hold button on any of these phones and the unit will automatically activate. Regardless of which phone this unit is installed on, all of the SB67118, 138, 148, 158 phones will be able to use it.

AD-30 P1 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for Panasonic KX-TG4000, and 4500 phones. Once installed on an AD-30, you simply use the hold button on any of these phones and the unit will automatically activate. Regardless of which phone this unit is installed on, all of the KX-TG4000, and KX-TG4500 phones and the KX-TGA400, and KX-TGA450 cordless handsets will be able to use it.

AD-30 P2 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for Panasonic KX-TS4100, 4200, and 4300 phones. Once installed on an AD-30, you simply use the hold button on any of these phones and the unit will automatically activate. Regardless of which phone this unit is installed on, all of the KX-TS4100, 4200, and 4300 phones will be able to use it.

AD-30 P3 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for Panasonic KX-TG9541 phones. Once installed on an AD-30, you simply use the hold button on the base phone or any of the handsets and the unit will automatically activate. When installed on a KX-TG9541 phone, all of the handsets will be also able to use it. NOTE: This phone can link with your Cell phone, if you do this the cell phone calls will NOT have music on hold.

AD-30 P4 Sensor Board

AD-30 Required. This sensor board works with the AD-30 Multi-Hold unit to provide seamless Message On Hold support for Panasonic KX-TG9471 phones. Once installed on an AD-30, you simply use the hold button on the base phone or any of the handset and the unit will automatically activate. When installed on a KX-TG9471 phone, all of the handsets will be also able to use it.

AD-31 Promotion On Hold Repeater

The AD-31 is a High Quality Promotion On Hold Repeater. This unit will play through your list of MP3s stored on the USB plugged into the unit. Should the unit loose power, upon return it will automatically start playing your messages again without any action from you. The unit comes with free software to manage your promotional messages and 8 generic COPYRIGHT free promotions to start with.

AD-40 Multi-Sim, Elevator Access Simulator

This unit was designed for today’s demands and looking to the future. The default setup for the AD-40 is the Local Access Simulator mode. This mode lets a local phone have access to a telephone answering system or Elevator Emergency Dialing System, without the cost of an additional phone line. The AD-40 can also be set to function as a Phone-To-Phone, True Tone Telephone Line Simulator that provides 48V on hook along with True: Dial Tone, Busy, Reorder, SIT, FAX Intro Tone, and both US Ring Up/Ring Back and UK Dual Ring Up/Ring Back signals.